AMINA PLATE CARRIER K20011
AMINA PLATE CARRIER
Modular plate carrier system designed for scalable loadouts, rapid configuration changes, and compatibility across modern armor and chest rig platforms.
Built around a hybrid 500D Cordura® and laminate construction, the AMINA focuses on balancing structural durability, modularity, ventilation, and reduced bulk for extended operational use.
With a compact 230 ? 85 ? 55 cm size and weighing just 2 kg, this sleeping bag is easy to transport and integrates seamlessly into tactical packs or expedition kits. Rated for -28°C extreme with comfort zones down to -5°C and operational use as low as -11°C it provides reliable warmth in the harshest winter conditions.
Right shoulder remains clear for proper weapon indexing
Unlike dual-quick-release setups, the AMINA uses a releasable buckle only on the left shoulder strap. This keeps the right shoulder free from additional hardware that can interfere with rifle buttstock placement and shooting consistency.
Designed as a true modular platform
The AMINA supports multiple configuration styles without forcing a fixed setup. It can operate with or without a front flap, supports direct chest rig integration, and allows direct-mounted cummerbund configurations depending on mission or load requirements.
Built around current ecosystem compatibility
Compatible with standardized MOLLE/PALS systems, split-bar buckles, QASM interfaces, and 2M ROC hardware, allowing integration with modern pouches, placards, and rapid-release systems without proprietary limitations.
Load-bearing structure without excessive bulk
The combination of 500D Cordura® and laminate materials reduces unnecessary weight and profile thickness while maintaining abrasion resistance and structural integrity under prolonged use.
Improved ventilation during extended wear
Internal 3D mesh panels increase airflow and reduce heat retention between the carrier and body, helping comfort during movement, warm environments, and prolonged operational cycles.
- Hybrid 500D Cordura® and laminate construction
- Full MOLLE / PALS compatibility
- Compatible with split-bar buckle systems including 2M ROC
- Left-side releasable shoulder system
- Clear right shoulder for improved buttstock positioning
- Direct cummerbund mounting to front plate bag
- Chest rig compatibility through QASM interface
- Internal 3D mesh ventilation panels
- Elastic cable management loops front and rear
- Large loop fields with integrated MOLLE slots
- Can be configured with or without front flap
- Horizontal MOLLE slots for lower accessory mounting
- Heavy-duty rear drag handle
- Compatible with multiple plate cuts and standards
- Main materials: 500D Cordura® + laminate fabric
- Interface compatibility: MOLLE / PALS / QASM / split-bar buckles
- Release system: left-side 2M ROC-compatible shoulder interface
- Internal ventilation: 3D mesh padding panels
- Supported plate types:
- SAPI
- EASPI
- Shooter Cut
- Swimmer Cut
- E-Cut plates
- Military and tactical operations
- Law enforcement tactical units
- Modular assault or reconnaissance loadouts
- Users requiring scalable armor configurations
- Extended wear environments where ventilation and weight balance matter
- Plate carrier is dependent on armor plate selection for ballistic protection
- Laminate construction prioritizes reduced bulk over heavy padding
- Requires proper setup and adjustment for optimal load distribution
- Not intended for flotation or climbing applications
SUMMARY
The AMINA Plate Carrier is a scalable armor platform designed around modern modular compatibility, reduced bulk, and practical weapon handling—keeping the shooting shoulder clear while supporting both streamlined and fully equipped configurations.
STINGER P20008
STINGER TACTICAL GLOVES Leather protection. Flexible where it matters. The Stinger Tactical Gloves combine a durable leather palm and finger construction with strategically placed stretch nylon on the upper hand and wrist. This combination provides reliable protection and abrasion resistance while allowing the glove to remain flexible and comfortable during active use. Designed with padded knuckle and finger protection, reinforced palms and finger ventilation, the Stinger is suited for tactical work, shooting, outdoor activities and demanding everyday use. Why its built this way Leather where protection matters The main construction of the glove uses durable leather across the palm, fingers and other primary contact areas, providing natural abrasion resistance, durability and a secure grip. High-density leather reinforces the palm and knuckle areas while the double-layer palm construction adds another layer of durability where the glove experiences the most friction and wear. Stretch nylon for mobility The stretch nylon material is positioned across the upper side of the short fingers and around the wrist, where flexibility is particularly important. This allows the glove to move naturally with the hand while reducing unnecessary bulk and improving comfort during extended wear. Protection without sacrificing dexterity Padded protection across the knuckles and fingers helps protect against impacts while maintaining the flexibility needed for handling equipment and performing precise tasks. Laser-cut ventilation openings in the fingers allow airflow through the glove, helping reduce heat and moisture buildup during active use. A built-in sweat band provides additional comfort during extended wear and helps manage perspiration. KEY FEATURES Predominantly leather constructionDurable leather palm and fingersHigh-density leather palm and knuckle areasStretch nylon upper hand and wrist panelsPadded knuckle and finger protectionDouble-layer palm reinforcementDouble-layer palm reinforcementIntegrated sweat bandFlexible construction for improved dexterity SPECIFICATIONS Main construction: LeatherUpper hand and wrist: Stretch nylonPalm: High-density leather with double-layer reinforcementKnuckles: High-density leather with padded protectionFingers: Leather with padded protection and laser-cut ventilationWrist: Stretch nylon constructionSweat management: Integrated sweat band IDEAL FOR Military personnelLaw enforcementSecurity professionalsTactical trainingShooting and range useHiking and trekkingBushcraft and campingHuntingOutdoor workGeneral utility use SUMMARY The Stinger Tactical Gloves use leather as the primary protective material while incorporating stretch nylon only where flexibility and ventilation are most useful. High-density leather, padded knuckle and finger protection and a reinforced double-layer palm provide durability and protection while the flexible upper construction helps maintain dexterity and comfort during active use. ..
ECHO RADIO POUCH NEW K17081
SPECIFICATIONS100% Nylon 500D Cordura®Nylon Bonded threadPrym® Snap buttonModular molle systemElastic bungee adjusting systemWxHxD 6.5x15.5x3cm..
ASPIS VEST K20008
ASPIS PLATE CARRIER Lightweight platform. Built around your loadout. The Aspis Plate Carrier is a lightweight and adaptable platform for users who need to carry ballistic plates and mission equipment without unnecessary bulk. Made from 500D Cordura® Nylon with a laser-cut bonded MOLLE system, it provides a durable foundation for a wide range of tactical configurations. Designed around mobility and fit, the Aspis combines adjustable cummerbunds, breathable padding and multiple attachment points to provide a secure and comfortable platform during demanding operations. Why its built this way Durable 500D Cordura® construction The main body is made from 100% 500D Cordura® Nylon, providing a strong balance between durability, abrasion resistance and weight. The laser-cut bonded MOLLE system reduces unnecessary material and bulk while providing attachment points for compatible pouches and mission equipment. Built around the plate The Aspis is compatible with Level IV+ ballistic plates and features a specially adapted internal plate holder designed to keep the plate securely positioned during movement. The adjustable construction allows the carrier to accommodate different body types and sizes while maintaining a stable fit around the torso. Comfort during extended wear A 3D spacer mesh and breathable body-facing materials help promote airflow between the carrier and the wearer. Additional foam padding provides cushioning around the shoulder areas, helping distribute the load more comfortably and reduce shoulder strain during extended use. The combination of soft body-facing mesh, padding and adjustable components creates a more comfortable interface without compromising the carriers overall durability. Configurable equipment platform Adjustable cummerbunds provide additional space for mounting compatible equipment while allowing the carrier to be fitted closely around the body. Hook-and-loop panels on the front and rear provide space for identification, badges and compatible patches. The laser-cut bonded MOLLE system allows users to configure the carrier according to their equipment requirements, from a streamlined setup to a more comprehensive loadout. Emergency access An integrated emergency drag handle on the rear provides a secure point for quickly moving the wearer away from danger when necessary. KEY FEATURES Lightweight plate carrier platform 100% 500D Cordura® Nylon construction Laser-cut bonded MOLLE system Compatible with Level IV+ ballistic plates Specially adapted plate holder for secure positioning Adjustable cummerbunds Hook-and-loop front and rear panels 3D spacer mesh Breathable body-facing material Additional foam padding for shoulder comfort Emergency drag handle Adjustable to different body types and sizes Weight under 500 g without plates SPECIFICATIONS Main material: 100% Nylon 500D Cordura® Body-facing material: 3D spacer mesh MOLLE: Laser-cut bonded system Plate compatibility: Level IV+ Cummerbund: Adjustable Front panel: Hook-and-loop Rear panel: Hook-and-loop Plate retention: Dedicated internal plate holder Emergency handle: Rear Weight: < 500 g without plates Fit: Adjustable IDEAL FOR Military personnel Law enforcement Security professionals Tactical teams Tactical training Field operations Deployment environments SUMMARY The Aspis Plate Carrier provides a lightweight and configurable platform for ballistic protection and mission equipment. Its 500D Cordura® construction, bonded laser-cut MOLLE system and secure plate retention provide a durable foundation while breathable mesh, additional padding and adjustable components improve comfort during extended wear. With flexible equipment configuration and an integrated emergency drag handle, the Aspis is designed for demanding tactical applications where mobility and load management matter. ..
